FANUC I Series AC Spindle Alarms
Fanuc I Series AC Spindle Alarm and Error Codes
Fanuc I Series AC Spindle Alarms covering the A06B-6060 series.
Please contact us if you need testing, a repair or an exchange part. For further information please visit our dedicated AC Spindle Amplifier Page.
| Alarm Code | Type
|
Description of Alarm/Error |
| 1 | Motor or radiator overheat | This lamp lights when the temperature of the motor or radiator raises abnormally. |
| 2 | Excessive deviation of speed | This lamp lights when the motor speed is largely deviated from the command speed. |
| 3 | +24 V fuse is blown | +24V fuse on the control circuit is blown. |
| 6 | Over speed detection (digital detection) | Detects over 115% of rated speed. |
| 7 |
Over speed detection (digital detection) | Detects over 115% of rated speed. |
| 8 | Over Voltage | Detects that the voltage is extremely higher than the rated voltage. |
| 10 | Low input power voltage | Detects that the input power voltage is too low. |
| 11 | Over voltage of DC Link | Detects that the DC power voltage is too high. |
| 12 | Over current of DC Link | Detects that the circuit current is too high. |
| 13 | Abnormal logic circuit | Detects abnormal communication among the micro processor and peripherals. |
| 14 | Defective ROM | Detects the ROM is abnormal. |
| 16-23 | Defective Logic circuit or peripherals | |
| No Indication | Defective ROM |