Toshiba D9MM-11A monitors. This monitors is one of a suite of licensed monitors fitting into Fanuc’s most popular CNC control systems: the 0C which spawns 0D, 0F, later 0M, 0T. Further the monitors is also found in various low end 16, 18, 20, 21 controls. DNC has been offering either an exchange or new equivalent replacement since 1995. Here are the choices:
D9MM-11A Exchange is a completely refurbished OEM monochrome 9″ CRT, tested and supplied with a 180 day warranty. Refurbished by DNC means fitted with new CRT tube, chassis & metal cleaned, repaired and tested.
DNC98 is our 9 inch LED replacement equivalent display. DNC has offered many varients of the DNC98 over the last 18 years starting with our own in house developed CRT replacement. The first in the world outside of Fanuc’s OEM efforts. Designed the circuit’s, made the pcb then populated it, etc. Moving on DNC were an early adopter of LCD technology for the colour 9″ and 12″ CRT replacements due to a reliable source of the scarce CRT tubes of them respective sizes. Now DNC are offering the lastest guise of the DNC98 – LED using the latest technology with every one after being built getting tested on one of the above Fanuc controls, too make sure you have no problems on installation.
So order the Exchange D9MM11A too keep your costs down, or the DNC98 for a 2 year warranty. Occasionally DNC releases a batch of CRT based DNC98 monitors with a 1 year warranty. Any questions, please ask.