Fanuc A06B-6079-H303 Servo Amplifier Module in stock. Second from largest of the first generation of ALPHA triple axis drives series controlling L, M and N channels and corresponding motors. Either used on small machining centre’s, EDM machines or more complicated CNC machines.
This SVM3-12/20/20 communicates with FANUC CNC control systems such as ZERO model C / D or 16/18 controllers via the TYPE A serial interface. As a result this drive controlled AC servo motors from a1/3000 through to aC/6000 on the two larger axes. Unfortuantely we do not supply the internal PCB’s including the A16B-2202-0783 and the A20B-2001-094x boards. However we do supply the transistor modules, fuses, battery and internal fans.
As mentioned above the A06B-6079-H303 is in stock. At DNC as one of the original companies to offer exchange Fanuc parts to the machining industries; we have these available on an exchange basis. If you are unsure if your drive is faulty or indeed one of the motors, system axis control card or cables; please consult our servo amplifier module alarms page for this drive.
We offer an extensive fault finding, testing, strip/clean service as well repair and rebuild facilities for your A06B-6079-H303 amplifier.
If issues are not in anyway straightforward then we would always recommend calling a CNC service engineer as they fix mechanical, electrical and electronics problems on CNC machines.