Fanuc A16B-2202-0434 ALPHA Spindle Module Control Board. This PCB is normally fitted in SPM series modules. This board is fitted upon 200VAC and 400VAC spindle amplifier drives varying in size from 5.5kW thru to 11kW. This is the main control card for Type 2 (Cs contour control / BZ sensor) drive amplifiers.
NOTE: DNC do not offer A16B22020434 alpha spindle command card separately from the complete 6078 type 2 spindle amplifier module. There are many reasons, but the most important is we offer a complete unit intact with the control PCB and the wiring PCB and fully tested by ourselves on our Fanuc test rigs with a 180 day warranty. Click here if you require a ALPHA SPM A06B-6078-H3xx series servo amplifier module, or put your Fanuc part number in the search bar above.