Fanuc A16B-2203-0501 ALPHA spindle control board SPM. This PCB is normally fitted in smaller 90mm wide spindle amps. This particular board is common on the 5.5kW and 11kW power modules. This is the main control card for the Type 1 drive amplifiers from the 6102 series spindle amps.
Note: DNC do not offer A16B22030501 alpha spindle command card separately from the complete 6102 series SPM type 1 spindle amplifier modules. There are many reasons, but the most important is we offer a complete unit intact with the control PCB and the wiring board; fully tested by ourselves on the our Fanuc test rigs supplied with a 180 day warranty. Click here if you require a ALPHA 6102 series spindle module, or put your Fanuc part number in the search bar above.