A06B-6134-H303#C
Fanuc A06B-6134-H303#C servo spindle unit. This C type unit known combines 3 axes channels and a ALPHA C type 15kW spindle amplifier. Similar to other C type interfaces for the spindle’s this unit is special and drives it own range of ALPHA i or BETA i series C type motors.
Capable of powering three model bi12/3000 servo motors and aiC15/6000 spindle motor. Normally found on lower end machine tools. This BETA i series combo drive has the following boards namely the power PCB A20B-2101-0025, control board A20B-2101-0013 and firing PCB A20B-2902-0672; netiher available seperate from complete SVMP unit.
As with all of the Fanuc parts that we repair for exchange stock, we have built up an extensive stock of components including intelligent power modules, opto’s, capacitors, isolation amplifiers and much more.
Further we test the A06B-6134-H303#C on our purpose built rig. Unlike a lot of Fanuc test rigs sold from the far east; we can actually control everything properly and run multiple programs, etc.
If you are unsure whether your Fanuc BETA amplifier unit is indeed faulty; refer to our Fanuc alarms page specifically for this series: Fanuc Beta biSVPM unit alarms.
A06B6134H303#C is normally in stock. At DNC we currently have stock of C type SVSP3 40/40/40-15i for either exchange or for outright sale (surplus). This is the quickest way you can get parts to your machine. Alternatively if cost is a more important consideration then we offer extensive repair and testing facilities for these amplifiers.
This drive is not interchangeable with the #A or #A#J003 or other variations. If ordering this drive must be the #C version of biSVSP 40/40/40-15 amplifier.