A06B-6059-H212
Fanuc A06B-6059-H212 AC Spindle Servo Unit. At DNC we have stocked and supported this 12kW spindle drive over the last 20 years. As part of the S series of spindle amps it drives either S series motors or P series motors dependent on software fitted. iTo that end this drive would normally be fitted with model 12S or 18P AC spindle motors.
The A06B-6059-H212 is available to be shipped today. We can supply either exchange (please call or email us) or you can purchase the drive on outright surplus basis online now.
Please note what you receive is the generic version of this drive. You will have to move your NVram and EPROMS on the A20B-1003-0010 from your 12S drive to this 12W drive as they customize the drive to your exact machine tool configuration. Software versions include: A06B6059H212#H514 and A06B6059H212#H570.
If you are unsure if your drive is the problem consult our Fanuc AC spindle alarms page. Though a rough guide, it may help illuminate the issue. If unsure then ship your complete 8S spindle drive too us with all relevant fault information for clean and inspection. At DNC we offer a standard 24 hour tunraround repair service on this drive. Allowing for minimal downtime on your machine tool.
Further we do supply the S series spindle control PCB, transistor modules and fuses for this AC spindle servo unit if required.
For exchange, testing and repair services please call us on +44 (0) 1793 615356 or email. If you require a replacement digital 12S spindle unit on surplus basis you can buy now online (UK only); if outside UK contact us for shipping, etc.