Fanuc A16B-1212-0100-01 Power Supply Unit. This power supply is dedicated Power Supply Unit with a built in I/P unit; FANUC’s first. Screws on the FANUC Series 0-C master PCB and its many variations, being one of three power supplies fitted on the latest of the 0 Series at the time. Including the derivative Systems such as the 0-MC, 0-TC, 0-TTC, 0P4C, 0-PC, 0-GC architecture utilising 386 . It can power either a 2, 3, 4 axis controlled from the half size main board as well as additional add. axis PCB’s with SUB CPU in the expansion slots of the full size masterboard. DNC offer many services for the Fanuc Series 0 model C, all variants: 0-MC, 0-PC, 0-TC, as well as the power supplies.
DNC offer stock of A16B1212010001 as exchange, or surplus ex-stock on an outright basis dependent on stock levels. Fault diagnosis, bench testing and fully loaded testing is possible on one of our many 0-C rigs throughout our Systems, drives and motor testing areas.