A02B-0130-B511
Fanuc A02B-0130-B511 control. This GE Fanuc series 18-TA system is the complete CNC control system, which includes PSU, and the MAIN CPU carrying loads of SMD’s plugged in throughout the system cards. This system supports up to 4 axis control and is normally fitted on a machining centre.
We do not supply complete controls – wouldn’t it be great if we could offer an out the box 18-TA too sit in place of your current problem control system. If you require the complete control maybe look at retrofit options with your local CNC service engineer. However we do carry thousands of 18 series main boards and SMD plug in cards and modules and can work through your faulty control to find the problem pcb. Such as the MAIN CPU A16B-2201-0080 replacing the FANUC POWER SUPPLY UNIT, various memory FROM, SRAM, GRAPHICS, AXS, SPINDLE smd’s and then testing to make sure its good. DNC also supply various FANUC fans and FANUC battery for this control
If you do require the complete control system or repair of your A02B0130B511 then contact us to go through all the options.