Fanuc A02B-0222-B503 control. This GE Fanuc series 16-MC system is the complete CNC control system, which includes PSU, MAIN CPU, option board, I/O card and loads of SMD’s plugged in throughout the system cards. This system supports 4 axis control and is normally fitted on a punch press such as Hitachi Seiki.
We do not supply complete controls – wouldn’t it be great if we could offer an out the box 16-MC too sit in place of your current problem control system. If you require the complete control maybe look at retrofit options with your local CNC service engineer. However we do carry thousands of 16/ 18 series main boards and SMD plug in cards and modules and can work through your faulty control to find the problem pcb. Such as replacing the CPU processor, various memory FROM, SRAM, GRAPHICS, AXS, SPINDLE smd’s and then testing to make sure its good. DNC also supply fanuc cooling fans for this system.
If you do require the complete control system or repair of your A02B0222B503 then contact us to go through all the options.