A20B-2902-0091
FANUC A20B-2902-0091 memory board. This FROM memory card is for large configuartions of series 16 and 18 controls. With 8MB of FROM allowing a large LADDER storage and NC basis instruction sets. The FROM being 8MB while on the lower end of capacity even for Fanuc it still allows the CPU processor on the main or seperate processor to pull from the FROM using the SRAM and DRAM memories.
At DNC we try to keep an active stock of boards such as this A20B29020091. Contact us for more information. Don’t forget we also repair the complete controls that boards such as this are fitted too. As a rule certainly for testing any of the SMD’s, main peripheral PCB’s, main pcb or the PSU; then we prefer to test the entire system. For fault information on the Fanuc 16/18/21 controls, please check our fault / alarms and error codes pages.
