A06B-6082-H222

A06B-6082-H222

Fanuc A06B-6082-H2ww ALPHA C spindle module. This spindle amplifier is a model SPMC-ww and powers alpha C series spindle motors. Using the standard C type interface this drive and motor combination is not reliant on a rear spindle sensor on the back of the motor. Instead fitted elsewhere on the spindle.

This 25.2kW C series spindle power amplifier outputs 95amp with either #H510 or #H511 or H512 which denotes different software. Unfortuntely due to power board variations not all are available. Namely A06B6082H222#H510, A06B6082H222#H511 and A06B6082H222#H512; please check for stock. Normally at DNC we supply ALPHA spindle modules on a service exchange basis; in which we supply the drive with deposit on a swap basis working for faulty.

Under our exchange terms units returned must be complete (no missing plastics); economically repairable and non interfered with. Otherwise we would recommend taking advantage of our clean, test and repair facilities for these SPMC-22 spindle drives.

We have one test rig at our UK facilities for testing this 25.2kW drive and can normally offer 24 hour repair turnaround. On the rare occasion we don’t have stock; by prior arrangement we offer same day test and repair. If you are unsure what your fault is then please consult our Fanuc ALPHA spindle module alarms page.

If you need information on availability or prices on exchange, repair and testing; please do not hesitate to contact us.