Fanuc A860-0356-T101 Encoder. This red plastic pulse coder is a 1M pulse Serial C feedback unit. Normally fitted on higher speed rated motors 0S/3000, 5S/3000, 10S/3000, 20S/3000 servo motors. With an alternative order part number from Fanuc of: A290-0561-V574.
DNC offer new and used refurbished encoders with warranty on an exchange basis (assuming in stock). Testing and fault diagnosis of these A8600356T101 is possible, dependent on fault. If the encoder is found to be faulty then only replacement can be offered. IF you are not sure whether its the Serial Pulse Coder A encoder or the AC servo motor its attached too then send us the complete Fanuc AC servo motor for test. If in doubt contact DNC for more details, warranty and prices.