A06B-0855-B100
Fanuc A06B-0855-B100 AC spindle motor. Part of the 200VAC ALPHA generation of drives and motors. Model a8/6000 with the following electrical ratings: S1 cont: 7.5kw between 1500-4500 rpm, and 4.5kw at 9000 rpm, max 44 amp; S2 30min Cont. 13kw between 1500-4500 rpm, and 7.5kw at 6000rpm – Max 63 Amp – 3 phase – 4 pole class H insulation IP54, 149-214V, straight shaft with rear blowing fan and flange mounted.
This A06B0855B100 motor from the Fanuc ALPHA 8/6000 Series AC spindle motor range is fitted with a standard alpha M spindle feedback for the serial spindle controllers. Please note there are several AC spindle motors under the A06B-0855-B100 label that are different due to the # suffix. i.e. #0500 is a high speed version such as a8/9000. This motor is not compatible with any other motor than itself!
Services Offered on a8/6000 spindle motor:
- Fanuc Exchange – When stocked we offer a fully refurbished READY to SHIP and tested spindle motor on exchange basis (SWAP) for economically repairable, complete and non interfered with part.
- Fanuc Repair – Regardless of the reasons whether shipping in for investigation, looking for a cheaper solution or we don’t have stock. Assessment, investigation is done within 48 hours.
- Fanuc Surplus – For damaged beyond repair or for critical spares DNC can often offer surplus AC spindle motors.
- Fanuc Testing – For the faults that are not clear as too the root cause we offer testing of your spindle motor.
- Fanuc Alarms – Consult our alarm tables for ALPHA spindle module or Control system spindle alarms
Contact DNC:
For clarification on availability and/or pricing for A06B-0855-B100 please contact us at +44 (0) 1793 615356 or email, use our contact forms throughout the website.
