Fanuc Alarm Codes
FANUC ALARMS
Thanks for visiting our Fanuc Alarm Code and Error page. Here hopefully surmised the various FANUC alarms & codes, error messages and various other fault codes present on FANUC drives, psu, CNC control systems from respective maintenance manuals dating back to 1979. If you require parts then please visit the links above or goto FANUC ALPHA MODULES, FANUC DRIVES, FANUC MOTORS, FANUC CONTROLS, FANUC PSU, etc.
FANUC ALARMS for ALPHA Module & BETA Unit:
Check for alphanumeric characters in the single or twin 7 segment LED displays on the ALPHA modules and LED’s on BETA units.
- a spindle amplifier
- a servo amplifier module
- a servo amplifier unit
- a power supply module
- aiSP spindle module / aiC spindle
- aiSV servo module
- aiPS power module / aiR power
- b servo unit / beta I/O alarms
- bi servo unit / bi I/O alarms
- bi SVPM, biSVSP
- E series servo amplifier unit
FANUC ERROR codes and alarms for Fanuc drives:
Check for LED’s lit on drive control PCB’s or numbers/letters such as AL.11 in the multi section 7 segment LED displays.
- DC AXIS unit alarms
- AC AXIS unit alarms
- AC Servo unit alarm codes
- S Series Servo alarms
- C Series Servo alarms
- AC Spindle unit alarms
- S Series Spindle Unit alarms
- I Series Spindle Unit alarms
- Fanuc (Serial) Spindle Servo unit alarms
FANUC ALARM Codes, Error Messages for FANUC CONTROLS:
Alarms for control systems are on the screens or LED’s lite on the PSU, I/P Unit, Master PCB, Main CPU or I/O controller and more.
- SERIES 0 (0A, 0B, 0C, 0D)
- SERIES 0i
- SYSTEM 3
- SYSTEM 6
- SYSTEM 10 / 11 / 12
- SERIES 15
- SERIES 16 / 18
- SERIES 16i / 18i / 21i
- SERIES 21
- FANUC P/S codes
- Fanuc PowerMate Alarms
Services Offered by DNC:
- Fanuc Exchange – When stocked we offer a fully refurbished READY to SHIP and tested Fanuc parts on exchange basis (SWAP) for economically repairable, complete and non interfered with part.
- Fanuc Repair – Regardless of the reasons whether shipping in for investigation, looking for a cheaper solution or we don’t have stock. Turnaround is normally 24 hours within business hours.
- Fanuc Surplus – For burn outs or for critical spares DNC can often offer surplus Fanuc parts.
- Fanuc Testing – For the faults that are either intermeittent or not sure of the root cause we offer testing of your Fanuc devices.
- Fanuc Alarms – Consult our alarm tables for Fanuc errors, codes and system and drive alarms.
Contact DNC:
For clarification on availability or pricing for Fanuc parts please contact us at +44 (0) 1793 615356 or email, use our contact forms throughout the website.